How to Put Ink Cartridges in a Printer?
Whether you just got a
new printer or it’s time to replace an empty ink cartridge in your existing
printer, putting an ink cartridge in your printer only takes a few minutes.
Once your printer is on, take your new ink cartridge out of the packaging, open
your ink tray and replace any old cartridges with your new ones. Most printers
operate similarly, creating putting a new cartridge in simple.
For Example Putting Ink Cartridges in a Canon Printer:
1. Open the
ink tray in the center of your printer. If you have a Canon printer that uses A FINE cartridge like in the MX or MG series, you will have a center paper output
cover which is above your output tray. Open your ink tray in the center which
is above the output tray.
• make sure that your
printer is plugged in and turned on. In order for the ink compartments to slide
into view, your printer must be powered on.
• The ink cartridges
will slide to the right side of your open tray. This is the replacement
position.
• In some Canon
printers, such as the MX or MG Series which uses FINE ink cartridges, the
cartridge holder moves to a replacement position behind the head cover. The
head cover can open automatically.
• If you have a Canon
PIXMA printer which uses several, smaller ink cartridges, the cartridge holder
can slide into the middle of your operations tray when you open the operation
lid on top of the printer.
2. Remove any
existing ink cartridges from the printer. If there are already ink cartridges
in your printer, you will have to remove these old ones.
• press down on the
ink cartridge you wish to remove. The cartridge lock lever can click,
dislodging the cartridge.
• Once you hear the
click and see the existing ink cartridge popped out, pull it the rest of the
way out.
3. Remove the
new ink cartridge from the packaging. Take the new cartridge from its packaging
and remove the protective tape.
• Some Canon printers
only use 2 cartridges, one black, and one tri-color, such as in the MX series.
Others like the PIXMA use several cartridges, one for each color. All
cartridges can have a protective film over the ink nozzle you need to remove.
• remove them
protective tab on the ink cartridge. This is a plastic film that covers the
part of your cartridge that dispels the ink.
• be careful to not
touch the copper-colored area of the cartridge or the ink nozzles. Touching
this area can cause clogs, ink failure, or disconnection if your fingerprints
smudge the area. Do not shake your cartridges either.
4. Insert
your new ink cartridges. Gently slide the new cartridge into the ink slot.
• Insert your
cartridge into the slot with the ink nozzles facing away from you.
• The color cartridge
goes on the left side. The black cartridge on the right side. Make sure you
hear a click to ensure the cartridge is locked into place.
5. Shut the
ink cartridge door. You should feel it click into place.
• Once the door is
closed properly you may hear the cartridges slide back into place.
• Finished.
I think it helps you.
If not and you have another the issue regarding Printers then don't worry and contact Printer Support
Phone Number they will surely help you to come out from the
any Printers problems
Comments
Post a Comment