Epson Printer: How to Clean the Print Head-CallPCExpert|+1-833-430-6109|

Introduction:-

When the print quality of the Epson printer your business depends on diminishes, dirty print heads could also be responsible. The print heads are responsible for transferring the ink to the paper. Over time, dried ink might clog the print heads, leading to lightweight or dark bands showing across the documents your print. Improvement the print heads will clear these clogs and restore correct ink flow.

Follow this step:-

1. Activate the printer and confirm that no print jobs are printing. If the ink light on the front of the printer is flashing then you must replace a cartridge before you can continue.

2. Confirm there is paper in the tray and add paper if necessary.

3. Click “Start” and “Devices and Printers” to view a list of all installed printers so double-click your Epson printer. Double-click “Adjust Print Options” to open the Printing Preferences window. choose the “Maintenance” tab and click on “Head cleaning.” alternatively, you can right-click the printer icon in the system tray and select the “Head Cleaning” option. These options may vary slightly depending on the version of Epson software installed on your computer. From a Mac, you must click “Applications,” select the “Epson Printer Utility” and then select your Epson printer from the list. Click “OK” and then select the “Head cleaning” option to open the head cleaning window.

4. Click “Start” when prompted to begin the improvement method. Some Epson software versions need you to click “Next” to proceed.

5. Wait for the head cleaning process to complete. This process may take several minutes. Turning off the printer during the improvement method might permanently damage the device. The printer’s power light that flashes during the cleaning method can stop blinking once the process completes.

6. Click the “Print Nozzle Check Pattern” option to click “Print.” Your printer prints a series of staggered lines. From a Mac, click “Confirmation” followed by “Next.”

7. Review the Nozzle Check pattern sheet that printed. If the pattern shows solid lines without any gaps or faint printing, the cleaning process was a success and you can click “Finish.” If the pattern contains gaps, then click “Clean” to run the print head cleaning method again.

Tips

•   Many Epson models allow you to use the printer’s control panel to run the print head cleaning utility. From the control panel, press and hold the “Ink” button panel for three seconds. Release the button when the power light begins to flash and you hear the cleaning process start. Wait until the power light stops flashing, indicating that the cleaning method is complete, and then print a nozzle check pattern to confirm the print head is clean.

•  Epson recommends using Epson ink cartridges rather than their third-party equivalents. Using incorrect ink may result in recurrent print head issues.

Epson Printer Support:

In case a problem persists and your Epson Printer doesn’t work, contact us Epson Printer Support. We support all the problems that you can face with Epson printer so, approach us soon as we are always ready to help you at any point in time.